Spring Due / Lavorazioni Postforming

This particular type of processing distinguished Spring Due’s initial core production: an unfinished panel is shaped along the edge and a sheet of HPL/CPL/PMMA-ABS is subsequently pressed onto its surface.

The protruding sheet is heated and bent to cover the edge.

We are in a position to achieve bending even with a radius of 2mm on 0.7 mm thick HPL or even smaller radii for thermoplastic surfaces (PMMA/ABS – PVC – PP etc.) with the possibility of using vinyl acetate or reactive hot-melt polyurethane adhesives depending on the circumstances.